Multipurus

Deep and continuous cleaning without touching the surface or using chemicals

UVA-activated coating for built environment

Multipurus™ for the built environment

How it works

Multipurus™ is a 100% natural coating that activates the photocatalysis process using UVA light. This process provides deep cleaning of surfaces and the air present. The coating is suitable for a wide range of substrates, is completely inert, and has a long-lasting effect.

i

Step 1

i

Step 2

i

Step 3

Step 1

MULTIPURUS can be applied directly over existing contamination.

Part of the coating may then come off along with the residue of the dirt, which is of course a waste. For an optimal and long-lasting result, it is therefore recommended to first clean the surface, let it dry, and then coat it. This ensures the optimal result is achieved over the long term.

Vorige
Volgende

Step 2

When the contamination is coated over, the contamination will fade and, depending on the surface partially or completely disappear. If residue remains on the surface, it is generally easy to spray off with water, and in outdoor situations, rain will take care of this.

Vorige
Volgende

Step 3

Every treated surface will look cleaner and brighter in a short time. This is a direct result of the continuous,powerful effects of photocatalysis.

A pre-cleaned surface will remain clean through photocatalysis. The only condition is that sunlight or artificial UVA LED light can reach the surface.

Vorige
Volgende

The benefits of Multipurus™ for the Built Environment

  • Completely inert

    The coating is completely inert and does not react with the environment in any way.

  • Activated by UVA

    Multipurus™ is activated by UVA from sunlight. This powerfully stimulates the natural process of photocatalysis.

  • 100% natural and safe

    MULTIPURUS is completely natural, non-toxic, 100% natural and safe.

  • Continuous cleaning of surfaces and air

    Fine dust, algae, mosses, fungi, bacteria, viruses, and nitrogen oxides disappear from surfaces and the air. New contamination can no longer adhere.

  • Protecting fragile surfaces

    Fragile surfaces such as old stone are protected because they are not touched and because the coating is completely natural. No chemicals are used in its manufacture in any way.

  • Effective for years

    The effectiveness remains undiminished for the long term, and no cleaning is required for the coated objects for years.

FAQ

The most important questions answered here

Has Multipurus™ already been applied in the built environment?

Yes, Multipurus™ has already been applied in a short time to large and small surfaces in built environments. Think of facades, walls, and terraces, but also objects such as a storm surge barrier or a football stadium.

How does Multipurus™ work on stone, metal, wood, and plastic surfaces?

Multipurus™ is a 100% natural and non-toxic coating that is applied to the greenhouse roof or facade by spraying with water. After a short time, the water evaporates, and the coating cures within a few hours. The coating is completely inert and does not affect the environment on its own. However, in combination with UVA from sunlight, the natural process of photocatalysis is established.

Photocatalysis ranks second in the ranking of cleaning power, immediately after sterilization at 360 °C. The effects are manifold: particulate matter, algae, mosses, lichens, bacteria, viruses, fungi, and nitrogen oxides disappear from surfaces and the air.

In addition, the coating stimulates the diffusion of incoming sunlight, thereby substantially increasing light efficiency. Furthermore, much less evaporation occurs due to accelerated drainage of condensation water. This results in significant temperature gains.

How is Multipurus™ applied?

Multipurus™ is applied easily and quickly by water misting. Large surfaces can be treated in a short time, both inside and outside the greenhouse.

What are the effects of Multipurus™ on contamination?

Photocatalysis ranks second in the cleaning power ranking, immediately after sterilization at 360°C. The effects are manifold: particulate matter, algae, mosses, lichens, bacteria, viruses, fungi, and nitrogen oxides disappear from surfaces and the air.

Is Multipurus™ safe for the environment?

Yes, Multipurus™ is completely safe. The coating is 100% natural and fully non-toxic.

Can Multipurus™ help reduce maintenance pressure?

Multipurus™ prevents maintenance through continuous, deep cleaning of surfaces and air. Its operation brings the greenhouse biotope into optimal condition. Everything benefits from this, including the biological balance.

PARTNER FOR THE BUILT ENVIRONMENT TOO

In collaboration with Poot Reiniging

The application of Multipurus™ for the built environment is also carried out in collaboration with Poot Reiniging. As a specialized partner for the treatment of any surface, Poot Reiniging handles the practical execution on site. In this way, the coating is professionally applied to facades, roofs, and gutters, but also, for example, to terraces, awnings, and other objects, both outdoors and indoors.

Carousel

Right: the result on concrete, 3 weeks after treatment
Before and after
For the built environment
Photocatalysis prevents algae growth
KNOWLEDGE BASE

View publications, research, and downloads about Multipurus™